UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

WASHINGTON, D.C. 20549

FORM 10-K

☒ ANNUAL REPORT UNDER SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the fiscal year ended October 31, 2022

☐ TRANSITION REPORT UNDER SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

Commission file number: 001-38154

CODA OCTOPUS GROUP, INC.

(Exact name of registrant as specified in its charter)

3300 S Hiawassee Rd, Suite 104-105, Orlando, Florida, 32835

(Address, Including Zip Code of Principal Executive Offices)

407 735 2406

(Issuer’s telephone number)

Securities registered under Section 12(b) of the Exchange Act:

COMMON STOCK, $0.001 PAR VALUE PER SHARE

Securities registered under Section 12(g) of the Exchange Act:

NONE

TABLE OF CONTENTS

FORWARD-LOOKING STATEMENTS

This Form 10-K includes forward-looking statements within the meaning of Section 27A of the Securities Act of 1933, as amended, which we refer to in this annual report as the Securities Act, and Section 21E of the Securities Exchange Act of 1934, as amended, which we refer to in this annual report as the Exchange Act. Forward-looking statements are not statements of historical fact but rather reflect our current expectations, estimates and predictions about future results and events. These statements may use words such as “anticipate,” “believe,” “estimate,” “expect,” “intend,” “predict,” “project” and similar expressions as they relate to us or our management. When we make forward-looking statements, we are basing them on our management’s beliefs and assumptions, using information currently available to us. These forward-looking statements are subject to risks, uncertainties and assumptions, including but not limited to, risks, uncertainties and assumptions discussed in this annual report. Factors that can cause or contribute to these differences include those described under the heading “Management’s Discussion and Analysis of Financial Condition and Results of Operations.”

If one or more of these or other risks or uncertainties materialize, or if our underlying assumptions prove to be incorrect, actual results may vary materially from what we projected. Any forward-looking statement you read in this annual report reflects our current views with respect to future events and is subject to these and other risks, uncertainties and assumptions relating to our operations, results of operations, growth strategy and liquidity. All subsequent written and oral forward-looking statements attributable to us, or individuals acting on our behalf are expressly qualified in their entirety by this paragraph. You should specifically consider the factors identified in this annual report, which would cause actual results to differ before making an investment decision. We are under no duty to update any of the forward-looking statements after the date of this annual report or to conform these statements to actual results.

PART I

ITEM 1. BUSINESS

Overview

Coda Octopus Group, Inc. (“Coda” “the Company” or “we”), through its wholly owned subsidiaries, operates two distinct businesses:

Our Marine Technology Business is a technology solution provider to the subsea and underwater market. It owns key proprietary technology including real time volumetric imaging sonar technology and diving technology, both of which are applicable to the underwater defense and commercial markets. All innovation, design, development and manufacturing of our technology and solutions are performed within the Company.

Our imaging sonar technology products and solutions marketed under the name of Echoscope® and Echoscope PIPE^® are used primarily in the underwater construction market, offshore wind energy industry (offshore renewables), and offshore oil and gas, complex underwater mapping, salvage operations, dredging, bridge inspection, navigation of underwater hazard, port security, mining, fisheries, commercial and defense diving, and marine sciences sectors. Our diving technology marketed under the name “CodaOctopus^® DAVD” (Diver Augmented Vision Display) addresses the global defense and commercial diving markets. It has the potential to radically change how diving operations are performed globally because it delivers real time information simultaneously to the divers underwater and their surface-based dive supervisors. It also allows diving operations to be performed in zero visibility water conditions which is a safety challenge for diving operations.

The Marine Technology Business operates thorough our wholly owned subsidiaries Coda Octopus Products Ltd (UK), Coda Octopus Products A/S (Denmark, Coda Octopus Products, Inc (Orlando) and Coda Octopus Products (India) Private Limited (India).

Our Marine Engineering Businesses are suppliers of embedded solutions and sub-assemblies which they design and manufacture and sell into mission critical integrated defense systems such as the Close-In-Weapons System (CIWS). The Services Segment established its business in 1977 and has been supporting a number of significant defense programs for over 40 years, including Raytheon’s CIWS and Northrop Grumman’s Mine Hunting Systems Program. The Services Segment’s business model entails designing sub-assembly prototypes which are utilized in broader defense programs. These prototypes contracts typically lead to contracts for the manufacture, repair and upgrade of these sub-assemblies. We are the sole source for the parts that we design and supply into these programs. This business model ensures recurring and long tail revenues since we continue to supply these parts, typically for the life of the program, which can span decades. Coda Octopus Colmek, Inc. and Coda Octopus Martech Ltd, qualify as a small business. This opens opportunity under state requirements to collaborate with Prime Defense Contractors on these programs. A significant part of the revenues generated by the Marine Engineering Business is usually highly concentrated and are derived from a small number of prime defense contractors such as Raytheon or Northrop. In any one year, between 20% to 30% of our consolidated revenues may be derived from these customers either alone or collectively.

The Services Segment operates through our wholly owned subsidiaries, Coda Octopus Colmek, Inc (“Colmek”) based in Salt Lake City, Utah, and Coda Octopus Martech Limited (“Martech”) based in Dorset, United Kingdom.

Cross-Group Synergies

Our Marine Technology Business and Marine Engineering Services Business have established synergies in terms of customers and specialized engineering skills for robust, rugged and repeated engineering solutions relating to data acquisition, data computation and display of the data. Increasingly drawing on each part of the business strengths, the Marine Technology Business and Marine Engineering Business work jointly on projects including responding jointly for tenders. We believe the Services Business is important to our overall growth strategy as it brings significant engineering depth for the onward development of our technology solutions offered by our Marine Technology Business. This also ensures more tight control over our intellectual property rights which are important for our market position in the space in which we operate.

Key Pillars for our Growth Plans

Our volumetric real time imaging sonar technology and our Diver Augmented Vision Display (“DAVD”) are our most promising products for the Group’s near-term growth.

Our real time 3D/4D/5D/6D Imaging sonars are the only underwater imaging sonars which are capable of providing complex seabed mapping and real time inspection and monitoring and providing 3D/4D/5D/6D data of moving underwater objects irrespective of water conditions including in zero visibility water conditions (which is a common and costly problem in underwater operations). Competing technology can perform mapping (but not complex mapping) without the ability to perform real time inspection and monitoring of moving objects underwater. We also believe our Echoscope PIPE^® is the only technology that can generate multiple real time 3D/4D/5D/6D acoustic images using different acoustic parameters such as frequency, field of view, pulse length, and filters.

Our customers include service providers to major oil and gas (“O&G”) companies, renewable companies, underwater construction companies, law enforcement agencies, navies, ports, mining companies, defense bodies, diving companies, research institutes and universities. We are widely considered the leading solution providers for real time 3D visualization underwater.

We also believe that the DAVD system is poised to radically change the way commercial and defense diving operations are performed globally by providing real time data to both diver and surface supervisor simultaneously, advancing the methods of communication, ability to consume and use digital information and real time imaging sonar data, thereby improving safety and reducing the costs of these operations. The DAVD HUD (Head Up Display) concept is protected by patent and is manufactured and distributed under License from United States Department of the Navy at Naval Surface Warfare Center Panama City Division to the Company.

The DAVD can be used in combination with any of our imaging sonars and can also be used without our imaging sonars. Increasingly, opportunities which we identify are for combined use.

Our corporate structure is as follows:

Corporate History

The Company began as Coda Technologies Limited. This company now operates under the name Coda Octopus Products Limited, a United Kingdom corporation formed in 1994 as a start-up company with its origins as a research group at Herriot-Watt University, Edinburgh, Scotland. Initially, its operations consisted primarily of developing software for subsea mapping and visualization using sidescan sonar (a technology widely used in commercial offshore geophysical survey and naval mine-hunting to detect objects on, and textures of, the surface of the seabed).

In June 2002, we acquired Octopus Marine Systems Ltd, a UK corporation, and changed our name to Coda Octopus Limited. At the time of its acquisition, Octopus Marine Systems was producing geophysical products broadly similar to those of Coda, but targeted at the less sophisticated, easy-to-use, “work-horse” market. The Octopus Marine Systems acquisition led to the introduction of the Motion product (F180^® series) into the Products Segment.

In December 2002, Coda Octopus Ltd acquired OmniTech AS, a Norwegian company, which became a wholly owned subsidiary of the Company, and which subsequently changed its name to Coda Octopus R&D AS. OmniTech owned the patents to a “method for producing a 3-D Image” (which has now expired). At the time of acquisition, this company had been engaged for over ten years in developing a revolutionary imaging sonar technology capable of producing real time three-dimensional (“3D”) underwater images for use in subsea activities. Coda Octopus Products Limited (Edinburgh based) then developed the visualization software to control and display the images from the real time 3D sonar device. This patented technology is now marketed by us under the brand name “Echoscope^®” and Echoscope PIPE^®. All activities of this now-defunct Norwegian subsidiary, Coda Octopus R&D AS, have been transferred to Coda Octopus Products Limited (Edinburgh).

On July 13, 2004, the Company effected a reverse merger pursuant to the terms of a share exchange agreement between The Panda Project, Inc. (“Panda”), a Florida corporation, and a now defunct entity affiliated with Coda Octopus Ltd. (“Coda Parent”). Panda acquired the shares of Coda Octopus Limited, a UK corporation and a wholly-owned subsidiary of Coda Parent, in consideration for the issuance of a total of 1,432,143 shares of common stock to Coda Parent and other shareholders of Coda Octopus Limited. The shares issued represented approximately 90.9% of the issued and outstanding shares of Panda. The share exchange was accounted for as a reverse acquisition of Panda by Coda. Subsequently, Panda was reincorporated in Delaware and changed its name to Coda Octopus Group, Inc.

In June 2006, we acquired Coda Octopus Martech Limited which is part of our Services Segment or Marine Engineering Business. This is an English corporation.

In April 2007, we acquired Coda Octopus Colmek, Inc. which is part of our Services Segment or Marine Engineering Business. This is a Utah corporation.

Both Martech and Colmek largely have the same business model, provide similar engineering services and sell to a similar customer base (one is UK focused and the other is US focused).

In December 2013 Coda Octopus Products Limited established Coda Octopus Products Pty Ltd (Australia) to grow our presence in Australia and New Zealand. However, since 2020 we have not been able to do meaningful business development due to the closure of Australian borders because of the Coronavirus Pandemic and, more recently, challenges in restoring our activities effectively on the ground.

In 2017 Coda Octopus Products Limited established a subsidiary Coda Octopus Products A/S in Denmark as part of the mitigation strategy relating to the UK withdrawal from the European Union (See Item 7 “Management’s Discussion and Analysis…”).

In November 2021 Coda Octopus Products Limited established a subsidiary Coda Octopus Products (India) Private Limited intended to gain access to this market and to recruit critical resources for software development for our Company.

Coda Octopus Group, Inc., is organized under the laws of the State of Delaware as a holding company that conducts its business through subsidiaries, several of which are organized under the laws of foreign jurisdictions, including England, Scotland, Denmark, Australia and recently India. This may have an adverse impact on the ability of U.S. investors to enforce a judgment obtained in U.S. courts against these entities, or to effect service of process on the officers and directors managing the foreign subsidiaries. These companies’ operations must comply with the laws of the countries under which they are incorporated and are likely to be different from the equivalent laws of the United States.

Marine Technology Business (“Products Segment”)

Our Marine Technology Business develops proprietary solutions for both the commercial and defense subsea market. The range of our solutions are complementary and include:

These products are sold, leased or rented into various marine sectors and include:

1. Geophysical Range of Products

Our geophysical systems (“GEO”) range of products include geophysical data acquisition systems, processing and analysis software that are used primarily by survey companies, offshore renewable companies, research institutions, salvage companies. The Company’s GEO range of products are used in conjunction with sidescan sonars to survey large areas and create images of the seabed, identify seabed boulders and objects, mark seabed type boundaries and identify existing subsurface structural features, geological layers, and/or buried debris. The Company started its first innovation with this range of products and in fact was the first company to digitalize sidescan sonar data. The Company’s GEO range is a strong brand in the geophysical market space.

2. GPS aided Inertial Positioning Systems

These are referred to as our MOTION range of products and offer high accuracy GPS aided inertial positioning and attitude data, essential for all marine survey applications. The products are commonly bundled with our GEO and real time sonar solutions offering our customers a seamless integration and support experience.

3. Real Time Volumetric Imaging Sonars (ranging from 3D/4D, 5D and 6D)

We design, develop and supply what we believe is the world’s most advanced series of real time volumetric imaging sonar. This is the culmination of over 25 years of research and development. This technology is protected by multiple patents. Furthermore, we continue to file patents relating to our new and revolutionary sonars, our 5-Dimensional (5D) and 6-Dimensional (6D) real time volumetric imaging sonars (marketed under the name Echoscope PIPE^® (Parallel Intelligent Processing Engine). Our sonar innovations are multi-tiered and extend to hardware, firmware and software, all of which co-exist and are co-dependent on each other. In other words, hardware, firmware and software operate as sub-systems to each other. We believe that the highly complex nature of this new technology will make it extremely difficult to reverse engineer our products. Pioneering this unique technology gives us a significant advantage over our competitors in the subsea real time 3D imaging sonar market sectors. We also believe that our three-tier product development capability of hardware, software and solution delivery adds to our competitive lead.

We believe that this technology is superior to the other imaging sonars in the market as it generates real time 3D, 4D, 5D and 6D images of the underwater environment irrespective of low or zero visibility conditions and, unlike conventional sonars, can image a volume (as opposed to a slice of data) and provide real time 3D inspection and monitoring capability underwater. The capability of our volumetric imaging sonars covers a broad breadth of activities underwater particularly for any form of underwater construction, salvaging, placements, decommissioning, obstacle avoidance and complex underwater mapping and real time 3D navigation in zero visibility conditions.

About the Company’s 5D and 6D Sonars Innovations

5D and 6D sonars are new to the subsea market and constitute an innovation by the Company. We have several patent applications pending for these innovations.

5D Sonars (Echoscope PIPE^®)

The advancement that the Company has made with its 5D Sonars is the ability to process and utilize much more of the data that is acquired by our volumetric imaging sonars. In the previous generation of our sonars, due to the state of the art of processing generally, there was an upper limit to the quantity of the acquired data that could be processed and displayed by the sonar system. This meant that in the previous generation of sonars when a signal was emitted, it returned a single range and intensity value per beam. In the 5D Sonars we return multiple range and intensity values (Full Time Series (“FTS”)) per beam. This new capability provides more information about the underwater environment. For example, it will give the user the ability to see multiple layers of soft target areas underwater such as gas leaks and suspended sediment above the seabed all concurrently (not one or the other) or concurrent imagery of marine life, sea growth on installations and the installations themselves. FTS will deliver all range values per beam as opposed to either the First (First Above Threshold (“FAT”) or the strongest return (MAX) provided by the previous generation of Echoscope technology. Our 5D capability is protected by a recently granted patent (US 10,718,865 – which concerns a method of compressing beamforming sonar data and US 10,816,652 which concerns a method of compressing sonar data) and 10,718,865 which concerns a method of compressing beamformed sonar data.

6D Sonars (Echoscope PIPE^®)

The Company’s 6D Sonars process and utilize much more of the data acquired by the sonar. 6D Sonars generate multiple real time 3D Full Time Series Images. In the previous generation of sonars, we could image and display one 3D Image in real time. Our PIPE technology generates multiple 3D Images simultaneously in real time using different sonar/acoustic parameters (such as frequency, range, field of view, pulse length and other acoustic filters or shading). Our new technology enables one sensor to provide different 3D/4D/5D/6D data sets (through multiple parallel processing capability) to different parts of the survey team operations in real time per their different operational requirements (thus consolidating the sensors and the associated costs and effectiveness of the solution). 6D Sonars can also record raw data that can be subject to PIPE Offline processing to generate unlimited data outputs. We are not aware of any sonars that can offer either 5D or 6D Capability.

In summary, our previous generation of real time 3D sonar was capable of providing only single acoustic images of underwater objects in real time 3D whereas the PIPE family of sonars is capable of providing multiple acoustic images of underwater objects in real time 3D/4D.

Sonar Hardware

During fiscal 2019, we completed critical innovation and advancement milestones around our core volumetric real time sonar technology. We have now introduced the world’s first 5D and 6D series of volumetric imaging sonar technology. This new series of sonars are marketed under the brand name Echoscope PIPE^® (an acronym for Parallel Intelligent Processing Engine). We believe our 5D and 6D series of sonars herald a significant leap forward in real time subsea imaging as this inventive capability allows a single sonar to provide different parts of the survey operations with multiple real time data sets (as opposed to one 3D dataset) for each part of the survey teams’ requirements.

A summary of some of the differences between our standard Echoscope® sonar series and our newly launched Echoscope PIPE® series of sonars are set out below:

We believe that our Echoscope^® technology will shepherd in the new generation of underwater real time 3D imaging sonar which will evolve into a real time information platform and gain market share through the increased adoption of real time 3D volumetric imaging sonar technology. Current competing imaging technologies such as the single beam, multibeam and scanning sonars are either 2D real time imaging sonars or 3D imaging sonars which are not capable of real time 3D imaging, that is to generate a 3D image underwater of moving objects. The competing 3D technology, the multibeam, which is the current standard bearer in the market is a sonar for mapping of the seabed. The Echoscope^® technology can not only map the seabed (and is superior to the multibeam for complex mapping and inspection of complex underwater structures) but can image in real time 3D moving objects underwater and therefore is the primary tool of choice for inspecting and monitoring in real time 3D all types of underwater operations and is the only choice in poor visibility conditions. In addition, the Echoscope^® can also in many instances enable the user to monitor underwater operations from a surface vessel and in this way replace Remotely Operated Vehicles (ROVs) thus bringing considerable cost savings to our customers.

Prior to January 2018, we were selling our third generation (3G) sonar series. In January 2018 we launched the first product within our fourth generation series of sonars (“4G sonar series”). The 4G sonar series was an important development milestone for the Company since it removed a number of barriers to market adoption. Since its introduction we have seen increased number of units being sold or rented. Due to the form factor of our previous generation of 3G sonar series this limited the types of underwater vehicles this generation of sonar could be integrated on (and therefore be used for) due to (i) size; (ii) weight and (iii) power requirements (“form factor barriers”). With the launch of the 4G sonar series we have removed these form factor barriers and can now integrate on the majority of underwater vehicles in the market including the new and fast emerging smaller underwater vehicles such as autonomous surface vehicles (ASVs) and unmanned underwater vehicles (UUVs) which are propelling growth in the underwater market, thus opening potentially new market opportunities for the Company’s technology.

The 4G sonar series developments were largely form factor driven as opposed to being based on performance and capability advancements. In fiscal years 2019 and 2020 we continued to build on our 4G innovations with a focus on performance and capability advancements, particularly on the beamforming and the data processing capability of our sonar series. In the previous generation of our sonars, due to limitations in processing technology there were restrictions on how much of the captured Echoscope^® sonar data could be processed by us. Our previous generations of sonars processed 16,384 pieces of data per sonar ping (compared to around 256 pieces of data per sonar ping for competing technology such as the multibeam). Under our new Echoscope PIPE^® sonar series for each signal that is generated by the sonar we receive back up to 40 million pieces of information which we can now process. In this context, we have two recent patents concerning a method of compressing beamforming sonar data and a method of compressing sonar data. We believe that this allows us to deliver to the market the first 5-Dimensional (5D) sonar and 6-Dimensional (6D) sonar capabilities and significantly builds on our 4G sonar series which radically changed the form factor and power requirements which were previously barriers to increased adoption. The advantages offered by our 5D and 6D Sonar Series have been discussed above under the heading (About the Company’s 5D and 6D Sonars Innovations). We started selling Echoscope PIPE^® in the market in March 2020. We are also seeing increased interest in Echoscope PIPE® technology in the market especially with OEM underwater vehicle manufacturers from the defense space.

The release of the Echoscope PIPE^® hardware, is a significant milestone. We are now focused on the value add to the technology via firmware and software capability. The finalization of this development now gives the Company a real opportunity to pursue its strategy to standardize this technology in the underwater imaging sonar market. We believe that in order to make the subsea and underwater market more efficient, it is mandatory that the standard moves to a real time 3D information platform. Many underwater operations are stalled due to poor visibility water conditions, preventing the remotely operated vehicles (ROVs) from flying and also the lack of ability to utilize the sonar data immediately because it requires post processing, which represents a significant challenge and costs. The subsea market is experiencing high structural and technology transitional changes including the introduction of the new generation of smaller and lighter vessels (both surface and underwater). This creates a demand for new sensors and solutions for real time 3D imaging. We believe that our lead in this area gives us a real opportunity to increase our market share.

Diver Augmented Vision Display (DAVD) System

Funded by the Office of Naval Research (“ONR”) through its Future Naval Capabilities (FNC) program, and in close collaboration with NAVSEA 00C3 and Naval Surface Warfare Center, Panama City Division (“NSWC PCD”) we have developed a diver see-through integrated information display system (DAVD).

DAVD is a complete end-to-end diver management solution incorporating as a key element a high-resolution, fully transparent glass head-up display (HUD) integrated directly inside the diving helmet (for hard hat surface air supply diving) or full-facemask (for tethered and untethered defense, commercial and recreational diving applications). The DAVD HUD is currently deployed in the world leading and most widely used Kirby Morgan^® range of dive helmets and is currently being released in the industry standard Interspiro “AGA”, OTS Guardian and the Divator and Dräger Panorama Nova Dive full-face masks. The DAVD HUD and system technology is not however limited to these products and applications.

Problem In Context

Navy and Commercial diving share common issues and challenges with location, visibility, communication, safety, accessing data and information sharing. Divers work mainly in murky or disorientating water conditions and rely heavily on their sense of touch to navigate and function. They work in the water column, around complex structure and on the cluttered sea bottoms which is neither safe nor efficient. They, and the diver support team, require dark spatial awareness memory as they work, arms outstretched in deep, dark, frigid waters to remember hazardous underwater debris, targets and terrain. Complexity of the task and this challenging environment directly increases risk, stress, and inefficiency for the entire team.

How does DAVD Change this?

The DAVD system addresses all the challenges described above. The DAVD technology benefits not only the diver and direct supervisor on the surface, but also engineers, end-clients, rescue workers and support personnel whom all have vested interest in a successful and safe mission. DAVD provides the location of the diver, the dive support vessel, work site assets and any hazards that are known or discovered in real-time. Real-time compass and depth are also displayed to the diver to reduce disorientation. Visibility for diver and team is dramatically enhanced with both real-time camera and 3D sonar data (providing underwater night-vision) and also high-resolution maps and models of the entire work site and surroundings. Communication is transformed from low quality audio speech to high quality digital audio and video, text messaging, visual alerts and automated navigation guidance. The safety of the diver and team is paramount. DAVD ensures the Diver and Supervisor are visually synchronized and can safely coordinate movement, tasks and instructions with full health monitoring and logging of the entire mission. Data and information sharing traditionally ends when the diver leaves the surface. DAVD provides a seamless and effective way to share any type of data, image, video, process or procedure instantly in real-time through the DAVD fully transparent HUD display (equivalent of >100” HD TV in-front of the diver). Data and information also flow up from the diver to the dive supervisor where the diver can look at an asset, make measurements or recordings and the entire task is captured and documented on the DAVD system.

The concept of using a pair of transparent glasses in the HUD to render real time information for underwater applications is protected by patent and Coda Octopus has an exclusive license from United States Department of the Navy at NSWC PCD to exploit this patent for all underwater diving activities. The DAVD is a significant technology for both defense and commercial underwater diving applications, and we believe that Coda Octopus has the opportunity to standardize this technology globally. The DAVD comprises both hardware comprising the HUD, Diver Processing Pack (DPP) (which is a Thermite^® variant), Cables and Topside Control Unit along with 4G USE^® DAVD Edition real time visualization software. All these development and products have been designed and developed by the Company.

The DAVD is currently in early-stage adoption with the US Navy and enjoys the benefit of an Approved Navy Use (ANU) product. We have also started marketing (through live demonstrations) this technology to friendly Navies globally and also to the commercial diving market. We have significant interest from a number of reputable global commercial offshore service providers and are working with them for early adoption of the technology and also a number of European friendly Navies including the UK Ministry of Defense (MOD).

GEN 3 of the DAVD which opens the market further by extending support to Full Face Masks (FFM), has now been finalized. The DAVD solution is now compatible with most helmets and face masks in the market.

Sonar Software

Our software development capability is an important part of our strategy to maintain our lead in designing, manufacturing, and selling state-of-the-art real time volumetric imaging sonars and our DAVD System.

Our existing third generation (3G) Underwater Survey Explorer software used in conjunction with our real time volumetric sonars, is a product which we have been developing for over 15 years. Because of technological advancements, including access to off the shelf components for more advanced processing of data (speed and size being factors), in 2016, the Company started the process of re-conceiving and developing its new generation of top-end software for our now much more advanced sonars. We have now launched our fourth-generation multi-sensor software platform which is marketed under the name “4G USE^®”. We have also filed several provisional patents around our 4G USE^® which is a multi-sensor platform allowing users to bring in and utilize a variety of sensor data including sonar, positioning, camera, lidar, video processing and other sources of point cloud data and seamlessly merging above and below the water data captured from the sonar and camera. It is also the platform for our DAVD software, and this is marketed under the brand 4G USE^® DAVD Edition.

Geophysical Products and Solutions

The Geophysical range of products are important for both Offshore Renewables and O&G. We therefore believe that with the expansion of the markets into Offshore Renewables, we will see an increase in the take up of this product suite, particularly in the global rental market. Our GeoSurvey^® and DA4G ranges are strong brands in these markets.

We started our business in 1994 designing and developing the GeoSurvey^® software and hardware package for acquisition and processing of sidescan sonar and sub-bottom profiler data. For over two decades, our GeoSurvey has been an industry leading software package in the market for data acquisition and interpretation and provides feature rich solutions and productivity enhancing tools for the most exacting survey requirements. Designed specifically for sidescan and sub-bottom data acquisition, GeoSurvey has been purchased by numerous leading survey companies throughout the world.

The Products Business generates around 2% of its revenues from this range of products. With the launch of the new products based on Artificial Intelligence technology for which we believe there is increased demand we would anticipate our revenues from this product line to increase over time.

Geophysical Hardware

These consist of a range of hardware solutions for field acquisition of sidescan sonar and sub-bottom profiler, which includes analog and digital interfaces compatible with all geophysical survey systems.

In 2018, we introduced our DA4G-USB product. This allows customers to integrate the DA4G hardware into their own PC configuration. Based on the CodaOctopus^® DA4G system, it offers the same functionality, robustness and ease of use. CodaOctopus^® DA4G is the fourth generation of our successful DA series and is built on twenty years of knowledge, experience and innovation in supplying unparalleled products and service to the worldwide geophysical survey sector. These purpose-built, turn-key, systems incorporate the very latest hardware specifications and are designed and delivered to meet the demanding nature of offshore survey work.

The CodaOctopus^® DA4G range consists of a number of options and is backed (like all our products) with global service and support.

This consists of an integrated suite of software that automates the tasks of analyzing, annotating and mosaicking complex data sets, thus ensuring faster and more precise results.

Geophysical Software

Our GeoSurvey^® software is supplied to complement our DA4G hardware, offering field acquisition of sidescan sonar and sub-bottom profiler data.

Our Survey Engine^® software product offers a more advanced post-processing solution for sidescan sonar and sub-bottom profiler data. Designed to streamline processing of very large data sets – many 100GBs – it offers comprehensive processing, interpretation, visualization, reporting and exporting functionality.

We continue to advance this range of products and in 2018 we launched our first product based on Artificial Intelligence techniques which allows us to automatically identify boulders on the seabed – SEADP – “Survey Engine Automatic Object Detection”. This new product presents a real opportunity to radically change workflow process for post-processing and analyzing side scan sonar data to assess, among other things, the suitability of an area for exploration and construction activities (O&G installations, pipeline and cable laying activities). This is in its early stage of roll out and has sparked significant interest. This is an area where we are investing our research and development efforts. We are also seeing good results from SEADP and some good quality early adopters of this new technology in the market.

Inertial Positioning and Attitude Measurement Systems (“Motion Products”)

Our Motion Products are Global Navigational Satellite System (referred to in the industry as “GNSS” Aided Inertial Measurement Units) provide measurement data on the position and attitude of a vessel. This device provides real-time data on these measurements which are applied to compensate for vessel movement in order to align sonar data and remove motion blur.

We have had our F180^® series in the market for over 15 years and due to advancement of technology and the increasing demand for more precise GNSS Aided instruments, we have now developed our new generation of Motion Products, our F280 Series^®.

New Generation of Motion Products

We have now completed the ground up development of our new generation of Motion Products F280 Series^® for accurate position, heading, pitch, roll and yaw at sea. The new F280 Series^® is based on more advanced technology and is more accurate than our F180^® series. The new technology is much more scalable towards future development of new product variants. The F280 Series^® is highly complementary to our real time volumetric sonar series and they are packaged together to provide a more comprehensive solution to our customers. The F280^® is sold with and without our sonar series.

Sales and Marketing

We market our products primarily through our internal sales team, website, industry events such as trade shows, webinars, industry relationships and agents in foreign countries such as Japan, China and Korea. In addition, we have a network of non-exclusive independent global sales agents. In 2023, a significant part of our business plan budget is allocated to business development, sales and marketing which will include recruiting new staff for more direct sales and business development.

Coda Octopus Products Limited has the requisite accreditations for its business including being Lloyds Register accredited to ISO 9001:2015 and Cyber Essentials certification.

Marine Engineering Businesses (“Services Segment”)

Our Marine Engineering Businesses comprise Coda Octopus Colmek, Inc. based in Salt Lake City and Coda Octopus Martech Limited based in the United Kingdom.

These two operating entities supply engineered sub-assembly solutions which form part of mission critical integrated defense systems, test equipment, instrumentation, and the like. They operate as sub-contractors to prime defense contractors, and their engineering solutions are typically designed for integration into broader defense programs where high levels of reliability and quality are essential pre-requisites for securing and maintaining these agreements with their customers. Typically, we prototype subassemblies for these customers and after going through various acceptance tests, including first article inspection approvals, we are given the manufacturing contracts. Many of these manufacturing contracts have a repeat orders profile which typically follows the life cycle of the defense program that is using the production part.

These arrangements often give us long term preferred/sole supplier status for the parts we supply, technology refresh and obsolescence management business opportunities with these customers and we generally use these long-standing relationships to win more contracts with these customers.

In order to grow, the Marine Engineering Business relies on increasing the number of new programs it attracts annually.

In addition, we are increasingly combining our engineering capabilities with our product offerings. This enables us to offer systems which are complete with installation and support to maximize the utilization of our collective expertise to advance our real time volumetric sonar technology.

Coda Octopus Martech Limited (“Martech”)

Martech, which is UK-based, operates in the specialized niche of bespoke design and manufacturing services mainly to the United Kingdom defense and subsea industries. Its services are provided on a custom sub-contract basis where high quality and high integrity devices are required in small quantities.

The Company enjoys pre-approvals to allow it to be short-listed for certain types of government contracts. Much of the more significant business secured by Martech is through the formal government or government contractor tendering process.

Coda Octopus Colmek, Inc. (“Colmek”)

Colmek, which is USA-based, are suppliers of embedded solutions and sub-assemblies which they design and manufacture and sell into mission critical integrated defense systems such as the Close-In-Weapons System (CIWS). This business was established 1977 and has been supporting several significant US defense programs for over 40 years, including Raytheon’s CIWS and Northrop Grumman’s Mine Hunting Systems Program (AQS-24). Colmek’s business model entails designing sub-assembly prototypes for defense programs which typically lead to contracts for the manufacture, repair and upgrade of these sub-assemblies. We are the sole source for the parts that we supply into these programs. This business model ensures recurring and long tail revenues since we continue to supply parts, typically for the life of the program, which can span decades.

Competition

In our Marine Technology Business (Products Business), we are exposed to the following competitive challenges:

Data Acquisition Products (GEO Products)

The industry for data acquisition and processing systems for sidescan and sub-bottom profiler data is fragmented with several companies occupying niche areas, and we face competition from different companies with respect to our different products.

In the field of geophysical products, Triton Imaging Inc., a US-based company, now part of the ECA Group (Toulon, France), Chesapeake, a US-based company, and Oceanic Imaging Consultants, Hawaii, USA, dominate the market with an estimated 25% each of world sales, while we believe that we control approximately 5% of world-wide sales.

GNSS Aided Inertial Positioning and Attitude Measurement Systems (“Motion Products”)

In the field of GNSS-aided inertial positioning and attitude sensing equipment, where our product addresses a small segment of the overall market, we believe that we have four principal competitors: Teledyne Marine (part of US based Teledyne Technologies Inc.) which is focused on the mid-performance segments with an estimated 25% of the market; iXblue, a French company which covers all segments, with an estimated 20% of the market; Kongsberg Seatex AS, a Norwegian company (part of Kongsberg Gruppen) which has products across all segments, with an estimated 15% of the market; and Applanix, a Canadian company (part of Trimble) which has one major product focused on the high end of the market, with an estimated 20% of the market. We believe that our market share in this market segment of motion sensing equipment is about 5%. This market is fiercely competitive and with the advancement of technology coupled with the development of autonomous land and marine platforms there are additional vendors in the market such as SBG Systems S.A.S (a French based manufacturer of motion sensors). We sell our MOTION range as part of our equipment suite to complement our 3D sonar range as well as supplying it individually. The development and introduction of our F280 Series^® of GNSS Aided Inertial Positioning and Attitude Measurement System^® constitutes our new generation of Motion Products and gives us the opportunity to increase our market share.

Real Time 3D/4D/5D and 6D Volumetric Sonar

In the field of Real Time 3D/4D/5D imaging, we are unaware of other companies offering a similar product. In this context it is important to understand some of the capabilities we bring to this field include:

The entry into this market is dependent upon specialized marine electronics, acoustic and software development skills. The learning curve, which has resulted in the advancement of our real time 3D sonar device, is the culmination of two decades of research and development into this field. Companies such as Kongsberg Gruppen, R2Sonic, LLC, Tritech International Ltd., United Kingdom, BlueView Technologies Inc., USA (now a part of Teledyne Technologies Incorporated), and Norbit Group AS Norway are examples, but none of these sonar offerings are directly comparable or competitors to our real time volumetric 3D/4D/5D and 6D sonar solutions as their scanning sonar, single beam or multibeam sonars are not real time 3D imaging sonars and therefore cannot image moving targets underwater. Specifically, we believe that they do not have the same capabilities as our Echoscope^® technology in terms of real time inspection and monitoring by generating 3D, 4D, 5D and 6D images of moving objects underwater including in environments in low or zero visibility conditions. Nor do they have the ability to use a single sonar for multiple real time 3D/4D images simultaneously. Notwithstanding it should be noted that Teledyne has acquired a significant number of substantial subsea companies (examples are Reson and BlueView). Teledyne has much greater resources, liquidity and market reach than our Company and has many operating verticals. We therefore can give no assurance that companies such as these will not enter this market. Furthermore, companies such as Kongsberg Gruppen and Teledyne can expend significantly more in any one fiscal year on R&D and Business Development, key pillars for increasing market share of underwater imaging sonars, than Coda Octopus. Notwithstanding, we believe that our recent development and introduction of 5D/6D - Echoscope PIPE^®) sonar capability in conjunction with our software (4G USE^® a multi-sensor platform) further distinguishes our volumetric sonars and significantly extends our lead over competitors in the subsea imaging market. We are not aware of any other imaging sonars in the market capable of generating real time 5D and 6D imagery underwater, which are Coda Octopus inventions. The innovations around Echoscope PIPE^® are the subject of numerous patent applications.

We seek to compete on the basis of producing high quality products employing cutting edge technology that is easy to use by operators without specialized skills in sonar technology. We intend to continue our research and development activities to continually improve our products, seek new applications for our existing products, develop new innovative products and grow the market for our products and expertise.

In our Services Segment, we are exposed to the following competitive challenges:

Marine Engineering Businesses

Through our marine engineering operations, Coda Octopus Colmek, Inc. and Coda Octopus Martech Limited, we are involved in custom engineering for the defense industry in the United States and in the United Kingdom. Martech and Colmek compete with larger contractors in the defense industry. Typical among these are Ultra Electronics, BAE Systems, and Thales, all of whom are also partners on various projects. In addition, the strongest competitors are often the clients themselves. Because of their size, they often have the option to proceed with a project under their Prime Defense Contract in-house instead of outsourcing to a sub-contractor like Martech or Colmek.

Intellectual Property

Our product portfolio and technologies are protected by intellectual property rights including trademarks, copyrights and patents. In the last 3 years we have advanced our existing sonar technology and have filed a number of significant patents applications pertaining to these inventions including covering our newly innovated 5D and 6D sonars. Furthermore, we have recently been awarded a patent which concerns a method of predicting and adjusting the laying of cable using sonar imaging. This is a significant patent for Offshore Renewables Market (Wind Energy), which is a rapidly increasing market sector and an important one for our growth. Our Echoscope^® and Echoscope PIPE^® technology is used for real time monitoring of cable installations for offshore wind projects. This Method which we have patented is used in conjunction with our Echoscope and automates the tracking of the cable (thus removing the need for an Echoscope^® operator who previously would be manually clicking on the cable touchdown point). This method covered by our recently awarded patent also projects the cable touchdown point.

Patents

Our patented inventions along with our strategy to enhance these inventions are at the heart of the Company’s strategy for growth and development. We expend a material part of our cash resources in building our Patent Portfolio. In the 2022 Financial Year we added two new patents to our portfolio. We also incentivize our staff by having in place a Patent Reward Scheme.

Our patent portfolio consists of the following:

* This is a significant patent as it covers our new innovation relating to our 5D Real Time Imaging Sonar (a real time sonar providing full time series 3D data) – See above where we discuss more about 5D Sonars under section “About the Company’s 5D and 6D Sonars Innovations”.

** This is a significant patent for Offshore Renewables Market. Our Echoscope^® technology is used for real time monitoring of cable installations for offshore wind projects. This Method, which we have patented, is used in conjunction with our Echoscope® technology and automates the tracking of the cable (thus removing the need for an Echoscope^® operator who previously would be manually clicking on the cable touchdown point). This method also projects the cable touchdown point.

***These will be granted once we have paid the necessary fees and completed certain applications.

Trademarks

We own the registered trademarks listed below and they are used in conjunction with the products that we market and sell:

Coda^®, Octopus^®, CodaOctopus^®, CodaOctopus & Design^®, Octopus & Design^®, F180^®, F280^®, F280 Series^®, Echoscope^®, Echoscope 4G^®, Echoscope 5D^®, 5D Echoscope^®, Echoscope 6D^®, 6D Echoscope^®, Echoscope PIPE^® Ping-Pong Echoscope Sonar^®, Ping-Pong Echoscope^®, Ping-Pong Sonar^®, 4G Underwater Survey Explorer^®, 4G USE^®, Echoscope Sequencer^®, Survey Engine^®, Dimension^®, DAseries^®, GeoSurvey^® CodaOctopus^® Air, CodaOctopus^® Vantage; CodaOctopus^® UIS; CodaOctopus^® USE, Sentiris^® and Thermite^®.

In addition, we have registered several internet domain names including www.codaoctopus.com; www.codaoctopusgroup.com; www.colmek.com and www.martechsystems.co.uk.

Research and Development (“R&D”)

Research and Development is foundational to our business strategy to ensure our growth strategy and maintain our competitiveness. During the fiscal years ended 2022 and 2021, we spent $2,237,920 and $2,982,676, respectively, on R&D, representing a 25.0% reduction. With the crystallization of several significant hardware development projects by the Company, research and development has fallen.

Our products are complex and therefore we can give no assurance that even with spending a significant part of our resources on R&D, we will be successful in our development goals or realized significant monetization of these developments. Furthermore, even following launch of any product we may not succeed. Moreover, we may incur significant research and development expenditures without realizing viable products.

Government Regulation

Because of the nature of some of our products, they may be subject to export control regimes including in the United States, United Kingdom, Denmark and Australia where we conduct business operations. Where our products are subject to such export control requirements, they may only be exported to our customers if there is a valid export license granted by the relevant government body. Moreover, these regulations may change from time to time in these jurisdictions, including the United States, depending on the existing relationship with the country to which the goods are exported. See Item 7 (Management’s Discussion and Analysis of Financial Condition and Results of Operation) for further discussion on this topic.

We are also required to maintain certain accreditations such as ISO 900 accreditation, cyber security certifications including Cyber Essentials and NIST, approvals to hold government items or materials and/or certain personnel or facility clearances.

In addition, as a provider for the US Government, we may be subject to numerous laws and regulations relating to the award, administration, Defense Federal Acquisition Regulations (“DFARs”) and performance of US Government contracts, including the False Claims Act. Non-compliance found by any one agency could result in fines, penalties, debarment, or suspension from receiving additional contracts with all US Government agencies. Given our dependence on US Government business, suspension or debarment could have a material adverse effect on our business and results of operations. In addition, the costs of complying with some of the regulations including DFARS may be prohibitive.

Employees

As of the date hereof, we employ approximately 83 employees worldwide, of which 12 hold management positions. A large majority of our employees have a background in science, technology and engineering, with a substantial part being educated to degree and PhD level. None of our employees are employed under a collective agreement and we have not experienced any organized labor difficulties in the past.

ITEM 1A. RISK FACTORS

Not required for smaller reporting companies.

ITEM 1B. UNRESOLVED STAFF COMMENTS.

None.

ITEM 2. PROPERTIES

Orlando, Florida

Our corporate offices are co-located with our subsidiary Coda Octopus Products, Inc. in Orlando. We own these business premises comprising 3,000 square feet that includes office space and R&D facilities.

Salt Lake City, Utah, USA

Coda Octopus Colmek operates from its premises which comprises 16,000 square feet and includes manufacturing, R&D Facilities and office space. These premises are owned by Coda Octopus Colmek.

Edinburgh, Scotland, UK

Coda Octopus Products Limited (Edinburgh based) operates from its premises comprising 12,070 square feet of internal space and includes manufacturing, R&D Facilities and office space. These premises are owned by Coda Octopus Products Limited.

Copenhagen, Denmark

As a mitigation strategy in relation to the UK leaving the European Union membership, thus limiting trade relations with EU member states, we have established a Danish subsidiary, Coda Octopus Products A/S and leased business premises in Copenhagen, Denmark. The lease is a fixed term lease for the period September 1, 2019 to September 1, 2023 and continues unless 6 months’ notice is given in advance.

Annual rent is DKK 142,893 plus Value Added Tax (being an equivalent of $20,472) per annum) with an annual increase of 3%.

Portland, Dorset, UK

Martech uses premises owned by Coda Octopus Products Limited. These premises are located in the Marine Center in Portland, Dorset, United Kingdom, and comprise 9,890 square feet. The building comprises both office space and manufacturing and testing facilities. Martech is paying Coda Octopus Products Limited rent amounting to the equivalent of $53,803 per annum.

All non-US Dollar denominated rents are stated according to prevailing exchange rates as of the date of each respective lease agreement.

ITEM 3. LEGAL PROCEEDINGS.

From time to time, we may become involved in various lawsuits and legal proceedings which arise in the ordinary course of business. However, litigation is subject to inherent uncertainties, and an adverse result in these or other matters may arise from time to time that may harm our business. We are currently not aware of any such legal proceedings that we believe will have, individually or in the aggregate, a material adverse effect on our business, financial condition or operating results.

ITEM 4. MINE SAFETY DISCLOSURES.

Not Applicable.

PART II

ITEM 5. MARKET FOR REGISTRANT’S COMMON EQUITY, RELATED STOCKHOLDER MATTERS AND ISSUER PURCHASES OF EQUITY SECURITIES

Our common stock has been traded on the Nasdaq Capital Market under the symbol “CODA” since July 19, 2017. Prior thereto, it had been quoted on the OTCQX since February 8, 2017, under the symbol COGI, and prior thereto, on the OTC Pink Sheets under the symbol CDOC. The following table sets forth the range of high and low bid prices of our common stock as reported and summarized on the Nasdaq, for the periods indicated. These prices are based on inter-dealer bid and asked prices, without markup, markdown, commissions, or adjustments and may not represent actual transactions.

We have not declared or paid any cash dividends on our common stock, and we currently intend to retain future earnings, if any, to finance the expansion of our business, and we do not expect to pay any cash dividends in the foreseeable future. The decision whether to pay cash dividends on our common stock will be made by our board of directors, in their discretion, and will depend on our financial condition, operating results, capital requirements and other factors that the board of directors considers significant.

ITEM 6. SELECTED FINANCIAL DATA

Not applicable.

ITEM 7. MANAGEMENT’S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OPERATIONS

Forward-Looking Statements

The information herein contains forward-looking statements. All statements other than statements of historical fact made herein are forward looking. In particular, the statements herein regarding industry prospects and future results of operations or financial position are forward-looking statements. These forward-looking statements can be identified by the use of words such as “believes,” “estimates,” “could,” “possibly,” “probably,” anticipates,” “projects,” “expects,” “may,” “will,” or “should” or other variations or similar words. No assurances can be given that the future results anticipated by the forward-looking statements will be achieved. Forward-looking statements reflect management’s current expectations and are inherently uncertain. Our actual results may differ significantly from management’s expectations.

The following discussion and analysis should be read in conjunction with our financial statements, included herewith. This discussion should not be construed to imply that the results discussed herein will necessarily continue into the future, or that any conclusion reached herein will necessarily be indicative of actual operating results in the future. Such discussion represents only the best present assessment of our management.

General Overview

We operate two distinct business operations. These are:

Our Marine Technology Business is a technology solution provider to the subsea and underwater market. It has a long-established pedigree in this market, and it innovates, designs, develops and manufactures proprietary solutions for this market (both for commercial and defense applications) including our range of flagship volumetric real time sonar solutions and our diving technology.

These solutions and products are used primarily in the underwater construction market, offshore oil and gas, offshore wind energy industry, and in the complex dredging, port security, mining and marine sciences sectors. Our customers include service providers to major offshore renewable companies, oil and gas (“O&G”) companies, law enforcement agencies, ports, mining companies, underwater vehicle manufacturers, Prime Defense Contractors as OEM integrators, defense bodies, fisheries and research institutes.

Our Marine Engineering Business is a supplier of engineering services and embedded solutions (such as mission computers) to prime defense contractors such as Raytheon, Northrop Grumman, Thales Underwater, Atlas Electronik UK and Babcock International Group. Generally, the items supplied into the defense market are sub-systems in broader mission critical integrated systems and thus requires a high level of reliability, consistency in standards and robustness.

We have long-standing relationships with prime defense contractors, and we use these credentials to secure more business. We support some significant defense programs by supplying and maintaining proprietary parts (or parts for which we are preferred suppliers) through obsolescence management programs. These services provide recurring stream of revenues for our Services segment.

Both the Marine Technology Business and Marine Engineering Business have established synergies in terms of customers and specialized engineering skill sets (hardware, firmware and software) encompassing capturing, computing, processing and displaying data in harsh environments.

Factors Affecting our Business

Our business is affected by a number of factors including those set out below:

The UK was a member of the European Union member states for close to 50 years. This membership enabled the freedom of movement of goods, persons, capital and services between member states. Following a referendum in 2016 the country voted to leave the EU. The UK withdrew from its membership of the EU on December 31, 2020. This withdrawal removed all rights which the UK previously enjoyed as a member.

As part of the withdrawal, the UK Government and EU reached an agreement on December 30, 2020, on trade in certain areas.

The change in the UK EU membership status adversely impacts our business in several important areas:

The Company established Coda Octopus Products A/S, in Denmark to maintain a presence in the European Union and to address some of the foreseeable issues. This subsidiary is crucial for our continued relationship with EU customers.

The Company’s operations are split between the United States, United Kingdom, Denmark, India and Australia. A large proportion of our consolidated revenues (53.9% in the 2022 FY) are generated outside of the United States by our foreign subsidiaries in the United Kingdom (“UK”) and Denmark. In addition, a significant part of our assets and liabilities (both current and fixed) is held in British Pounds and Danish Kroner by these foreign subsidiaries. Foreign Currency Translations as they pertain to our assets and liabilities are translated at the prevailing exchange rate at the balance sheet date and related revenue and expenses are translated at weighted average exchange rates in effect during the period (see paragraph n (Foreign Currency Translation) of Note 2 – Summary of Accounting Policies of our audited Consolidated Financial Statements as of October 31, 2022). Significant currency fluctuations (particularly the British Pound and/or the Danish Kroner, Euros, versus the US Dollar) may affect our financial results and the value of our assets. We are therefore subject to currency fluctuation risks. In the Current 2022 FY, due to the sharp depreciation of the Pound, Danish Kroner and Euros against the USD, our revenues were impacted by $1,192,833 when applying the same exchange rate in the 2021 FY.

Inflation measured as the Consumer Price Index is significant in the countries in which we operate. In the twelve months to October 31, 2022, these were:

In the 2022 FY the impact of Inflation has not been material since we were holding significant inventory and also had our salaries and professional fees in place at the beginning of the 2022 FY. However, we believe global inflation will pose a significant risk to our business in the 2023 FY. Inflation affects our business in several areas and therefore our overall financial results. For further discussions on Inflation see the relevant section of Item 7 MD&A which concerns “Inflation and Foreign Currency”.

We sell our products globally and increasingly to Asia. The recent change in both the US and UK Governments’ attitude (and to a lesser extent the European Union member states) towards trade with China, directly affects the sale of our products to customers based in China. Our real time 3D sonars which are depth rated above 300 meters along with our inertial navigation and attitude measurement sensors (F280^® series) are subject to export control for certain countries, including China and therefore requires an export license. We also are not allowed to promote our DAVD technology in China.

On December 22, 2020 the US Government Department of Commerce (Bureau of Industry and Security, Commerce) amended the Export Administration Regulations (EAR) to add seventy-seven (77) Chinese entities “determined ….to be acting contrary to the national security or foreign policy interests of the United States”. The amended EAR in general states that there is a “presumption of denial” of grant of export licenses to these entities and their affiliates. In a new pronouncement dated November 4, 2021, the US Government has expanded the list significantly which is an indication that the US Government policy and disposition towards China is hardening and companies in the technology space will increasingly find it difficult to sell to China due to government restrictions.

The UK Government is generally in lock step with the US Government’s position and has refused to grant export licenses for several of the Company’s applications for end users in China for the first time in 25 years of our dealing with the UK Export Control Organization. The curtailment of access to this market due to refusal to issue export licenses is likely to significantly impact our revenues from Asia.

Furthermore, even though our sonars which are depth rated at 250m or less do not require export licenses for China, and our other products such as our geophysical products and Pan & Tilt devices, the UK Customs are now indiscriminately seizing all our shipments which are consigned for China.

In 2022 FY we realized much less in sales to China, and we believe this is a result of the political environment.

The removal of China as a trading partner is likely to have significant negative impact on our revenues and growth strategy. China has one of the largest planned investment programs for offshore renewables, the market for which most of our technology is used for in China. After significant business development in China, we had started to see persistent and credible growth for our products in this market. Unless there is a change in this policy, we are likely to see a decline in growth and sales into the Chinese Market.

We rely on the availability of raw materials including electronic assemblies and semiconductor to manufacture our products and solutions and offer our engineering services. 

Due to the exceptionally high demand in the semi-conductor market with limited supplies available, we are experiencing extreme lead times for components which are necessary for the manufacture and service of our products and providing engineering design services by our Engineering Business. We are also seeing significant price increases for these and other routine components. Both the extended lead time, in some instances 99 weeks lead time is being quoted by suppliers, and the price increase may affect our ability to meet customer requirements and make the prices of our products or engineering service uncompetitive. The Products Business may reasonably endeavor to reduce the impact of the extended lead times we are experiencing by priming well in advance our supply chain as far as possible. However, the impact on the Engineering Business is more severe and could grind their operations to a halt since this part of our business does not know what components are required until their customers place an order for bespoke engineering work packages. We therefore have a high risk that our Engineering Business’ may be severely impacted by the shortages that we are currently experiencing. The increased inventory evidences our mitigation strategy to increase inventory where we can and, in this regard, a significant part of our cash resources in the 2023 FY is geared towards supporting our supply chain requirements.

Our technology is based on electronics that are designed and manufactured to our specification exclusively for us. These electronic components are costly. Advancement in technology may make these specialized components or circuits obsolete. Reengineering these key components could result in significant capital expenditure and also may cripple the production of our products since quick replacements cannot be found and would require new engineering work. Furthermore, there is no broader market for these components.

In addition to the disruption in the Supply Chain, we are also experiencing very significant increase in price of raw materials which we are unlikely to be able to pass on to our customers. These increases may make the cost of making our products prohibitive and uncompetitive and could affect our margins and also the viability of our business.

We are experiencing extreme shortage of personnel with key skills which are critical to our business, such as electronic engineers, software development skills, technical support engineers, field support engineers and sales and business development skills. This situation is further compounded by significant increases in wages and salaries. In addition, with the UK withdrawing from EU membership, this exacerbates an already critical situation for businesses. In the UK where we have a significant part of our activities including Manufacturing and Research & Development, there is acute shortage of skills and many industries demanding pay increases in excess of current inflation rate of 11.1%. The UK is seeing extensive strike actions across the country, and this will put further pressure on businesses to meet and exceed inflation-proof salary increases. This is likely to increase the cost of operations, in particular, our SG&A expenditures in the 2023 FY.

As a small business, we are hindered in our ability to compete for certain specialized electronic engineering skills as our remuneration package is not as competitive as those offered by bigger companies which are competing for the same skills.

We are looking to address the skills shortage by establishing a subsidiary in India, where software development skills and support engineers’ skills are more readily available (as we do not believe the local situation will improve in the near future- given the different Tech companies that are competing for the same skills). We can, however, give no assurance that this will serve as adequate mitigation for this issue.

We are dependent on the timely allocation of funds to defense procurement by governments in the United States and the United Kingdom. A large part of our revenues in the Services Segment derives from government funding in the defense sector. In general, where there is a change of government, spending priorities may change from those priorities of the previous Administration. This may adversely impact on our revenues. Furthermore, the US Federal Defense Budget is dependent on the New Administration being able to secure approval in Congress for the defense budget. The slim majority on which the current Administration operates is likely to hinder future spending on new defense projects.

A significant part of our growth strategy is predicated on our flagship real time volumetric imaging sonar technology and our Diver Augmented Vision Display (DAVD) solution. The technology space is inherently uncertain due to the fast pace of innovations and therefore we can give no assurance that we can maintain our leading position in these areas or that innovations in other areas may not surpass our solutions that we currently supply to the subsea market. An example of new technology entering the subsea market is LIDAR technology. However, unlike our sonar technology, LIDAR technology cannot be employed in zero visibility conditions and cannot generate a volume pulse or image moving objects required for real time inspection and monitoring underwater.

Critical Accounting Policies and Estimates

This discussion and analysis of our financial condition and results of operations is based on our consolidated financial statements that have been prepared in accordance with accounting principles generally accepted in the United States of America (“US GAAP”). The preparation of financial statements in conformity with US GAAP requires our management to make estimates and assumptions that affect the reported values of assets and liabilities and the disclosure of contingent assets and liabilities at the date of the financial statements and the reported levels of revenue and expenses during the reporting period. Actual results could materially differ from those estimates.

Below is a discussion of accounting policies that we consider critical to an understanding of our financial condition and operating results and that may require complex judgment in their application or require estimates about matters which are inherently uncertain. A discussion of our significant accounting policies, including further discussion of the accounting policies described below, can be found in Note 2, “Summary of Accounting Policies” of our Consolidated Financial Statements.

Revenue Recognition

All of our revenues are earned under formal contracts with our customers and are derived from both sales and rental of underwater technologies and equipment for imaging, mapping, defense and survey applications, diving technology and from the engineering services that we provide. Our contracts do not include the possibility for additional contingent consideration so that our determination of the contract price does not involve having to consider potential variable additional consideration. Our product sales do not include a right of return by the customer.

Regarding our Products Segment, all of our products are sold on a stand-alone basis and those market prices are evidence of the value of the products. To the extent that we also provide services (e.g., installation, training, etc.), those services are either included as part of the product or are subject to written contracts based on the stand-alone value of those services. Revenue from the sale of services is recognized when those services have been provided to the customer and evidence of the provision of those services exist.

For further discussion of our revenue recognition accounting policies, refer to paragraph h of Note 2 “Revenue Recognition” in our Consolidated Financial Statements.

Stock based Compensation

We recognize the expense related to the fair value of stock based compensation awards within the consolidated statements of income and comprehensive income. The fair value of stock based compensation is determined as of the date of the grant or the date at which the performance of the services is completed (measurement date) and is recognized over the periods in which the related services are rendered.

Income Taxes

The Company accounts for income taxes in accordance with Accounting Standards Codification Topic 740, Income Taxes (ASC 740). Under ASC 740, deferred income tax assets and liabilities are recorded for the income tax effects of differences between the bases of assets and liabilities for financial reporting purposes and their bases for income tax reporting. The Company’s differences arise principally from the use of various accelerated and modified accelerated cost recovery system lives for income tax purposes versus straight line depreciation used for book purposes and from the utilization of net operating loss carry-forwards.

Deferred tax assets and liabilities are the amounts by which the Company’s future income taxes are expected to be impacted by these differences as they reverse. Deferred tax assets are based on differences that are expected to decrease future income taxes as they reverse. Correspondingly, deferred tax liabilities are based on differences that are expected to increase future income taxes as they reverse. Note 8 to the Consolidated Financial Statements discusses the amounts of deferred tax assets and liabilities, and also presents the impact of significant differences between financial reporting income and taxable income.

For income tax purposes, the Company uses the percentage of completion method of recognizing revenues on long-term contracts which is consistent with the Company’s financial reporting under U.S. GAAP.

Goodwill and Intangible Assets

Goodwill and intangible assets consist principally of the excess of cost over the fair value of net assets acquired (i.e., goodwill), customer relationships, non-compete agreements and licenses. Goodwill was allocated to our reporting units based on the original purchase price allocation. Goodwill is not amortized and is evaluated for impairment annually or more often if circumstances indicate impairment may exist. Customer relationships, non-compete agreements, patents and licenses are being amortized on a straight-line basis over periods of 2 to 15 years. The Company amortizes its intangible assets using the straight-line method over their estimated period of benefit. We annually evaluate the recoverability of goodwill and intangible assets and carefully consider events or circumstances that warrant revised estimates of useful lives or that indicate that impairment exists.

Step 1 of the goodwill impairment test used to identify potential impairment compares the fair value of the reporting unit with its carrying amount, including goodwill. If the fair value, which is based on future discounted cash flows, exceeds the carrying amount, goodwill is not considered impaired. The Company has adopted Accounting Standards Codification 2017 – 04, Simplifying the Test for Goodwill Impairment, which permits the Company to impair the difference between the carrying amount in excess of the fair value of the reporting unit as the reduction in goodwill.

At the end of each year, we evaluate goodwill on a separate reporting unit basis to assess recoverability, and impairments, if any, are recognized in earnings. An impairment loss would be recognized in an amount equal to the excess of the carrying amount of the reporting unit compared to the fair value of the reporting unit. To date, the Company has not had any goodwill impairments.

Fiscal Year 2022 Consolidated Results of Operations

In this Form 10-K, the following meanings are ascribed to the terminologies set out immediately below:

In the Current FY revenues increased by 4.2% over the Previous FY, Gross Profit Margins fell by 0.9%, total operating expenses fell by 6.8% and operating income increased by 30.4%. Net income before taxes fell by 2.3% and after taxes by 13.1%. The main factor is that in the Previous FY we recorded in “Other Income” exceptional items totaling $1,350,440 (comprising Paycheck Protection Program (“PPP”) and Employment Retention Credits (“ERC”)) contributions whereas in the 2022 FY we recorded $88,917 comprising ERC. Without these exceptional items in both the Current FY and Previous FY, net income before taxes would have been $5,043,418 and $3,902,804, respectively, thus representing a 29.2% increase in net income before taxes in the 2022 FY.

Our revenues in the Current FY have been materially affected by the sharp depreciation of the Pound, Danish Kroner and Euro against the USD our reporting currency. A significant part of our consolidated revenues is translated from Pounds and Danish Kroners to USD. The overall impact of this currency fluctuation is $1,192,833, when using the exchange rate of the Previous FY.

In the Current FY the Products Business generated revenues of $14,724,688 compared to $15,804,222 during the Previous FY. The part of the Products Business revenues generated by the Company’s foreign subsidiaries in the UK and Denmark, has been impacted by the significant fall in the Pound and the Danish Kroner against the USD, our reporting currency. This means that when comparing the same exchange rate of the Previous FY, the Products Business revenues in the Current FY after translating from Pound to USD fell by $913,899. Therefore, without the significant depreciation of the Pound and the Danish Kroner against the USD in the Current FY, the Products Business revenue would have been $15,638,587 and in line with the Previous FY.

In the Current FY the Engineering Business generated revenues of $7,501,115 compared to $5,527,305, an increase of 35.7%. However, the UK part of our Engineering Business was also impacted by the significant depreciation of the Pound against the USD and, as a direct result, revenues were adversely impacted by $278,934.

We are increasingly reducing the impact of currency fluctuations on our foreign subsidiaries revenues by transacting our sales in USD. In the Current FY, 46.1% of our revenue was transacted in USD compared to 26.4% in the Previous FY.

Comparison of fiscal year ended October 31, 2022, to fiscal year ended October 31, 2021

The information provided below pertains to the Company’s consolidated financial results. For information on the performance of each Segment including the disaggregation of revenues and geographical split, see Note 13 (“Segment Analysis”) of our audited Consolidated Financial Statements as of October 31, 2022, and 2021.

Revenue:

We realized an increase in revenues of 4.2% in the 2022 FY compared to the 2021 FY. However, as discussed above, the sharp depreciation of the Pound against the USD in the Current FY has impacted our revenues generated by our foreign subsidiaries by $1,192,833 and thus our overall consolidated revenue in the 2022 FY.

The Products Business revenues declined by 6.8% in the Current FY. This is largely due to the sharp depreciation of the Pound, Euro and Danish Kroner against the USD. A significant part of our revenues is derived from our foreign subsidiaries in the UK and Denmark and therefore for the purpose of reporting, the functional currencies of these subsidiaries are translated into USD. Applying the same exchange rate as the Previous FY, revenue of the Products Business was negatively impacted by $913,899. Without this sharp depreciation, the Products Business revenue would have been largely in line with the 2021 FY.

The Engineering Business revenues increased by 35.7%. However, similarly, the foreign subsidiary part of Engineering Business based in the UK was also impacted by the sharp decline of the Pound against the USD. Assuming the same exchange rate as the Previous FY (which our Business Plan is geared to), revenue of the Engineering Business was negatively impacted by $278,934.

Gross Margin:

Gross Profit Margins reported in our financial results may vary according to several factors. These include:

In the 2022 FY Gross Profit Margins for the Marine Technology Business were 80.0% compared to 79.9% in the 2021 FY. For the Engineering Business, these were 45.4% in the 2022 FY compared to 38.6% in the 2021 FY.

Since there are more variable factors affecting Gross Profit Margins in the Marine Technology Business, a table showing a summary break-out of sales generated by the Marine Technology Business in the 2022 FY compared to the 2021 FY is set out below:

In the 2022 FY the Products Business paid $596,426 in commission compared to $605,620 in the 2021 FY as there were less sales via our Agents/Distribution network.

In the Current FY the Products Business generated revenues of $14,724,688 compared to $15,804,222. The part of the Products Business revenues generated by the Company’s foreign subsidiaries in the UK and Denmark, has been impacted by the significant fall in the Pound and the Danish Kroner against the USD, our reporting currency. Therefore, assuming the same exchange rate of the Previous FY, the Products Business revenues in the Current FY after translating from Pound to USD fell by $913,899. Without the significant depreciation of the Pound and Kroner against the USD in the Current FY, the Products Business revenue would have been $15,638,587 and largely in line with the Previous FY.

For more detailed information on the composition and disaggregation of our revenues, please refer to Note 14 (“Disaggregation of Revenue”) of our audited Consolidated Financial Statements of October 31, 2022, and 2021.

Research and Development (R&D):

Research and Development costs are, in general, an inherent ongoing cost for the Marine Technology Business operations since it will need to either maintain the products it has in the market or continue to advance these products and its core technology to keep them competitive (both in price and performance) and to expand the product offerings which we have in the market.

Accordingly, we continue to invest in research and development to further our business goals including maintaining our lead in the real time volumetric imaging sonar sector (Marine Technology Business) and our new-to-market diving technology (DAVD).

In the 2022 FY this category of expenditure decreased by 25.0%. The decrease is largely due to reduced spending in this area in the Engineering Business, where expenditures fell by 93.6% and was $30,420 in the 2022 FY compared to $473,569 in FY2021. This reflects our strategy to reduce expenditures on the Thermite^® Octal development until we can gage both market and customer requirements through the demonstrations of the capability of the Thermite^®.

In 2022 FY the Products Business research and development expenditures fell by 12.0%. This is largely a reflection that we have completed the capital-intensive development phase associated with onward development of the hardware phase our real time 3D/4D/5D/6D sonar technology and our F280 Series^®. Our developments are now focused on feature enhancements and the like and are largely firmware and software enhancements.

Changes in this category by Segment are set out immediately below:

Selling, General and Administrative Expenses (SG&A):

SG&A in the 2022 FY was largely in line with 2021 FY expenditures.

Notable factors in our SG&A 2022 FY are:

Within the category of SG&A we have transactions which are cash charges and non-cash charges. The non-cash charges comprise Depreciation, Amortization and Stock-based compensation charges. In 2022 FY and 2021 FY, respectively non-cash items as a percentage of SGA expenses were 20.5% and 20.6%, respectively.

Stock Based Compensation Expenses (Non-Cash Item). In the 2022 FY we expensed $1,130,917 for stock-based compensation as compared to $1,050,821 in the corresponding 2021 FY, representing an increase of 7.6%.

In the 2021 FY, the Company had $135,000 as contribution under the UK Government Coronavirus Job Retention Scheme (CJRS), thus reducing SG&A in 2021 FY. There were no contributions under the CJRS in the 2022 FY.

Further discussions on SG&A are set out immediately below.

Key Areas of SG&A Expenditure across the Group for the year ended October 31, 2022, compared to the year ended October 31, 2021

Although in FY2022 expenditures relating to Wages and Salaries increased by 11.6%, it should be noted that in the 2021 FY we had had contributions under the UK Coronavirus Job Retention Scheme (CJRS) of $135,000 which reduced this category of expenditures. In the 2022 FY there were no such contributions. In addition, market conditions for wages and salaries have changed significantly. We are seeing a persistently sharp rise in the costs of labor in the market and therefore anticipate that this area of expenditures will continue to increase in the 2023 Financial Year.

In 2022 FY regarding Legal and Professional Fees we recorded $125,000 as a refund from our UK auditors. This means that in real terms, without this refund, Legal and Professional fees have increased by 20.2% which is a reflection of additional financial resources that we have taken on and an increase in our overall audit fees.

In the 2022 FY expenditures relating to the category of “Rent” increased by 25.6% compared to FY 2021. Rent is not a material expenditure in the Group as most of our premises are owned by the Company, except for premises used in Denmark.

In 2022 FY expenditures relating to the category of “Marketing” increased by 309.1%. In 2021 FY this area of expenditure was depressed due to continued restrictions caused by the Coronavirus Pandemic. In 2022 FY we have been able to participate in more industry-related trade events and anticipate that this category of expenditures will continue to increase in the 2023 Financial Year as we focus our business strategy on business development and sales and marketing.

Operating Income:

In the 2022 FY Operating Income increased by 30.4%. The increase in Operating Income is largely due to the increase in Revenue by 4.2% over the 2021 FY coupled with a fall in Total Operating Expenses by 6.8%.

Other Income:

In the 2021 FY Other Income included $648,872 representing amounts received under the PPP and $701,568 in ERC which the US Administration made available as part of the Pandemic response package for US companies. In the 2022 FY we did not receive any contributions under the PPP but recorded $88,917 for ERC. Outside of these exceptional amounts, this category of income is not material for the Company.

Interest Expense:

This is not a material category of expenses for the Company since in December 2021 we have repaid all indebtedness under our Senior Secured Debenture with HSBC NA. We therefore do not anticipate Interest Expense to be a material item of expenses in our financial statements.

Net Income before Income taxes for the year ended October 31, 2022, compared to the year ended October 31, 2021

In the 2022 FY, Net Income before taxes fell by 2.3% despite an increase in revenues (by 4.2% over the previous 2021 FY), a reduction in Total Operating Expenses by 6.8% and a reduction in the category of Interest Expenses. A factor in this is that in the 2021 FY, Net income before taxes was positively impacted by exceptional items of “Other Income” comprising (PPP and ERC) totaling $1,350,440. In the 2022 FY Net income before taxes was marginally impacted by exceptional items of “Other Income” comprising ERC and totaling $88,917. Without these exceptional items in “Other Income” in both the 2022 FY and 2021 FY, Net Income before taxes would have been $5,043,418 and $3,902,804, respectively, and representing a 29.2% increase in Net Income before taxes in the 2022 FY.

Net Income after Income taxes for the year ended October 31, 2022, compared to the year ended October 31, 2021

In the 2022 FY, Net Income after Income taxes fell by 13.1%. This is due to a number of factors. In the 2021 FY, Net income before taxes was positively impacted by exceptional items of “Other Income” comprising (PPP and ERC) totaling $1,350,440. In the 2022 FY Net income before taxes was marginally impacted by exceptional items of “Other Income” comprising ERC and totaling $88,917. Without these exceptional items in “Other Income” in both the 2022 FY and 2021 FY, Net Income before taxes would have been $5,043,418 and $3,902,804, representing a 29.2% increase in Net Income before taxes in the 2022FY. Additionally, in the 2022 FY we recorded tax expense of $831,114 compared to $305,479 in the 2021 FY, representing an increase in the 2022 FY of 172.1%.

Comprehensive Income for the year ended October 31, 2022, compared to the year ended October 31, 2021

In the 2022 FY, Comprehensive Income was $1,231,156 compared to $5,601,984 for the 2021 FY reflecting the adverse effects of currency fluctuations. Comprehensive Income is affected by fluctuations in translating foreign currency transactions of our foreign subsidiaries into USD relating to both our profit and loss expenses and valuation of our assets and liabilities comprised within our balance sheet. A significant part of the Company’s reported financial results emanates from its foreign subsidiaries including in the UK and Denmark, resulting in translation from these foreign subsidiaries functional currencies to USD. In the Current FY the USD strengthened significantly against most major currencies including the Pound, Euro and Danish Kroner. The Company therefore realized significant adjustments relating to foreign currency transactions in the Current Year. In the 2021 FY we realized a gain on foreign currency translation adjustments relating to these transactions of $654,219 compared to a loss on these transactions in the 2022 FY of $3,070,065. In the 2022 FY the USD has strengthened against major currencies including the British Pound, Euro, Danish Kroner and Indian Rupees (the functional currencies of our foreign operations). A substantial part of these losses are paper losses associated with re-valuation of our foreign subsidiaries balance sheet. A significant part of the Company’s operations is based in the UK, and therefore a significant part of our financial transactions is performed in Pounds which are translated into USD for reporting purposes. In the 2022 FY, the Pound has fallen significantly against the USD (approximately by 8%). This is a key factor in the loss relating to foreign currency translations transactions in the 2022 FY. See Table 1 under the section which concerns “Inflation & Foreign Currency” which shows the impact of the currency adjustments.

Segment Analysis

We are operating in two reportable segments, which are managed separately based upon fundamental differences in their operations. Segment operating income is total segment revenue reduced by operating expenses identifiable with the business segment. Overhead includes general corporate administrative costs.

The Company evaluates performance and allocates resources based upon operating income. The accounting policies of the reportable segments are the same as those described in the summary of accounting policies.

There are inter-segment sales in the table below which have been eliminated from our financial statements. However, for the purpose of segment reporting, these inter-segment sales are included in the table below only.

The following tables summarize certain balance sheet and statement of operations information by reportable segment for the financial years ending October 31, 2022, and 2021, respectively.

Coda Octopus Martech and Coda Octopus Colmek (“Services Segment” or “Marine Engineering Business”) are providing engineering services as sub-contractors mainly to prime defense contractors and Coda Octopus Products operations are comprised primarily of product sales, technology solutions sales, rental of equipment and/or software and associated services (“Products Segment” or “Marine Technology Business”).

The Company’s reportable business segments sell their goods and services in four geographic locations:

Liquidity and Capital Resources

As of October 31, 2022, the Company had an accumulated deficit of $14,176,636, working capital of $33,542,200 and stockholders’ equity of $43,382,809. For the year then ended, the Company generated cash flow from operations of $6,726,967.

We believe that our current level of cash and cash generation will be sufficient to meet our short and medium-term liquidity needs. As of October 31, 2022, we had cash on hand of $22,927,371 and both billed and unbilled receivables of approximately $3,472,715. Our current cash balance represents approximately 35 months of Selling, General and Administrative Expenses. The Company continues to critically evaluate the level of expenses that we incur and reduce those expenses as appropriate.

We also have access to a revolving line of credit of $4 million from HSBC NA. This line of credit is available to the Company for short-term working capital purpose. All amounts under the Revolving Line of Credit are payable at the end of each financial year. The facility was renewed for another year until November 2023. To date, the Company has not had reason to borrow any funds for its operations under this credit line.

Our main liquidity issues are forward buying components and inventory for our products which encompass specialized electronics for which there is no after-market except for the products to which they are designed for, funding our research and development program (“R&D”) which requires significant expenditures in attracting engineering skills and incurring non-recoverable costs for researching, developing and prototyping products and managing our currency exposure and business development and marketing costs required for the success of our business.

Operating Activities

Net cash generated from operating activities for the year ended October 31, 2022, was $6,726,967. We recorded net income for the period of $4,301,221. Other items in uses and sources of funds from operations included non-cash charges related to depreciation and amortization, deferred tax asset and stock-based compensation, which collectively totaled $1,676,563. Changes in operating assets increased net cash from operating activities by $1,205,916 and changes in current liabilities decreased net cash from operating activities by $456,733.

Investing Activities

Net cash used in investing activities for the year ended October 31, 2022, was $556,560

Financing Activities

Net cash used in financing activities for the year ended October 31, 2022, was $91,896.

Secured Promissory Note

On April 28, 2017, the Company together with its wholly owned US subsidiaries, Coda Octopus Products, Inc. and Coda Octopus Colmek, Inc., entered into a loan agreement with HSBC Bank NA for a loan in the principal amount of $8,000,000. The annual interest rate was fixed at 4.56%. The loan was secured by all assets of the Company and its U.S. subsidiaries and of three of the Company’s overseas subsidiaries. The entire remaining balance of $63,559 was repaid by the end of the 2021 calendar year.

Foreign Currency

The Company maintains its books in local currency: US Dollars for its US operations, British Pounds for its United Kingdom operations, Danish Kroner for its Danish operations, Australian Dollars for its Australian operations and Indian Rupees for its Indian Operations.

For the 2022 FY, 46% of the Company’s revenue were conducted inside the United States and 54% outside the United States through its wholly owned subsidiaries in the United Kingdom and Denmark. As a result, currency fluctuations may significantly affect the Company’s sales, profitability, balance sheet valuations and financial position when the foreign currencies of its international operations are translated into U.S. dollars for financial reporting purposes. In addition, we are also subject to currency fluctuation risks with respect to certain foreign currency denominated receivables and payables. Although the Company cannot predict the extent to which currency fluctuations may affect the Company’s business and financial position, there is a risk that such fluctuations will have an adverse impact on the Company’s sales, profits, balance sheet valuations and financial position. Because differing portions of our revenues and costs are denominated in foreign currency, movements in those currencies could impact our margins by, for example, decreasing our foreign revenues when the dollar strengthens and not correspondingly decreasing our expenses. The Company does not currently hedge its currency exposure. In the future, we may engage in hedging transactions to mitigate foreign exchange risk. However, as a strategy the Company is endeavoring to transact its sales by its foreign subsidiaries in USD. In the Current FY 46% of our revenue was in USD compared to 27% in the Previous FY.

The translation of the Company’s denominated balance sheets and results of operations into US dollars (USD) are affected by changes in the average value of USD against the currencies of our foreign subsidiaries operating in GBP, DKK and AUD (our limited operations in INR are not considered material for this purpose) included in our consolidated results.

These are the values we have used in the calculations below which show the impact of these currency fluctuations on our operations in the 2022 FY: